SYNTHEC 0W/30

Markalar

Kategoriler

SYNTHEC 0W/30

PRODUCT DISCRIBTION: Mondo Kimya provide a wide range of Synthetic, Simi-Synthetic, Mineral, and industrial gear oils which are A composition of high-quality base oils that are carefully selected and mixed with anti-corrosion additives to provide the maximum levels of viscosity and high fluidity, especially at low temperatures, which gives a longer life to the gears as well as to the oil itself and guarantees exceptional smoothness in gear-shifting, suitable for gearboxes and rear axles with helical gears or screws. ADVANTAGES: • Good thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission. • Good anti-wear and load carrying characteristics extend the life of components. • Improved low temperature protection and gear shifts. • Excellent anti wear/EP and synchroniser performance makes it ideal for use in transaxles. • Better protection leads to longer transmission life and performance. • Excellent shift quality especially at low temperatures improves driver comfort. • Low temperature fluidity improves wear protection at start up and offers the potential for fuel savings. • Temperature reduction in operation extends oil and component life and aids fuel efficiency/ emissions reduction. • Very good high temperature stability gives excellent transmission cleanliness prolonging the life of lubricant and transmission.

TEST	METHOD	UNITS	RESULTS
Density @ 15C, Relative	ASTM D4052	g/ml	0,848
Viscosity, Kinematic 100C	ASTM D445	mm²/s	11,8
Viscosity, Kinematic 40C	ASTM D445	mm²/s	65,7
Viscosity Index min	ASTM D2270	None	163
Pour Point max	ASTM D97	°C	-34
Flash Point, PMCC min	ASTM D92	°C	224
Total base number	ASTM D2896	mg KOH/g	8,2
Ash, Sulfated	ASTM D874	mass%	0,7

Yukarıdaki rakamlar tipik üretim rakamlarıdır ve spesifikasyon teşkil etmez.

Storage

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions. Mondo will not accept liability if the product is used other than in the manner or with the precautions or for the purpose/s specified, Kindly refer to the Material Safety Data Sheet of the Product for Health, safety, environmental, potential hazards, precautions and First Aid measures, together with environmental effects and disposal of used products.

Packing size

1 LT

3 LT

4 LT

5 LT

7 LT

16 LT

18 LT

20 LT

25 LT

30 LT

60 LT

208 LT

1000 LT

Quantity Per Box

12 PCS

6 PCS

4 PCS

3 PCS

TIN OR PLASTIC

TIN barrel

IBC

Özel durumlarda minimum sipariş adetleri talep edilebilir.